Law Firm Trades Subcontract Agreements: Use case and AI Confidentiality
A trades subcontract is where a head contractor’s whole commercial position meets one subcontractor: the price, the retention, how variations are approved, the insurance, the safety duties and the right to terminate. It is a form the firm reuses, so staff paste the latest draft into ChatGPT or Claude to tidy the clauses or compare it with the last job. The draft names the project and its end customer, and often still carries the firm’s note about the budget and what the contractor will pay. This page marks every item in a subcontract draft that rule 9 and privilege bear on, and shows how the same draft is prepared on Ermos inside the firm.
The trades subcontract agreement
Prepared by the head contractor’s solicitor from its standard form and signed before the subcontractor mobilises on site.
Subcontract: plasterboard partitions and ceilings
Draft for signature · Monday 9 November 2026
Parties and project. Corbel & Hale Constructions Pty Ltd (Contractor) and Tolliver Plastering Pty Ltd (Subcontractor). Project: fit-out of Suite 2, Level 1, 74 Kingsway Lane, Castle Hill NSW 2154 for Stanhope Medical Partners Pty Ltd1.
1. Price. The Subcontract Price is $142,800 plus GST, a lump sum for partitions, ceilings and bulkheads as shown on drawings A-201 to A-208.2
2. Retention. The Contractor holds 5% of each progress payment as retention. Half is released at practical completion and the balance at the end of the 12 month defects liability period.3
3. Variations. The Subcontractor must not carry out a variation unless the Contractor’s Representative has directed it in writing. A variation claimed without a written direction is not payable.4
4. Payment. The Subcontractor may claim on the last day of each month, and the Contractor pays each progress payment 20 business days after the claim. Payment is not conditional on the Contractor being paid by the Principal. Nothing in this subcontract excludes the Building and Construction Industry Security of Payment Act 1999 (NSW).5
5. Insurance. The Subcontractor must hold public liability insurance of $20 million and workers compensation insurance for its workers, and give certificates before starting.6
6. Work health and safety. Each party must comply with its duties under the Work Health and Safety Act 2011 (NSW). The Subcontractor must consult, cooperate and coordinate with the Contractor and other duty holders on the site, give the Contractor its safe work method statements before starting high risk work, and report every incident within 24 hours.7
7. Termination. If the Subcontractor commits a substantial breach and does not fix it within 7 days of written notice, the Contractor may terminate, take over the work and recover its extra cost from the Subcontractor.8
Drafting note, delete before sending: Corbel & Hale will go to $155,000 for this package, and the Principal’s budget for partitions is $168,000. Tolliver’s last claim on Level 3 at Marsh Street included $9,600 of variations with no written direction, so the clause 3 wording is deliberate. Do not mention either point.9
Executed by Dale Corbel and Maxine Hale, directors of Corbel & Hale Constructions Pty Ltd, and Marcus Tolliver, sole director of Tolliver Plastering Pty Ltd. EV / JM10.
An invented subcontract draft with the firm’s note still attached. Hover or tap any highlighted item for the analysis; the full list is below.
Trades subcontract drafter
An Agent+ that prepares the trades subcontract for the head contractor. It fills the standard form with the price, retention, payment terms and scope from the tender and letter of intent, adds the site safety clauses from your library, and lists any internal pricing notes to remove before issue.
What it does
- Reads the tender, letter of intent and standard form
- Fills the price, retention, payment and scope terms
- Lists internal notes to remove before the draft is issued
What stays with your people. The head contractor's solicitor settles the subcontract and the commercial manager confirms the figures. The agent drafts; it does not issue the document.
An Agent+ is built once and anyone in the practice can run it. It works from your own documents and runs on Ermos Dominion, the AI unit in your office, or on Ermos Edge, your own instance in an Australian data centre.
What leaves the firm
- 1The parties, the project and the end customer
Two named companies, the building and the principal. Confidential to the client under rule 9, and the principal is a third party whose fit-out is not public. Rule 9 confidentiality guide.
Frontier Models (ChatGPT, Claude) Transmitted to the provider, generally offshore on personal plans Ermos Edge Stays on your instance in Australia; leaves only inside a permitted excerpt, per question, to the named provider Ermos Dominion Stays on the unit in your office Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 2The price
A lump sum for a package of work. A negotiated price, and the figure a competing head contractor or other subcontractors would most like to see. Rule 9 confidentiality guide.
Frontier Models (ChatGPT, Claude) The price transmitted Ermos Edge Stays on your instance in Australia; leaves only inside a permitted excerpt, per question, to the named provider Ermos Dominion Stays on the unit in your office Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 3The retention and the defects period
The retention rate and when it is released. Contract terms with the project attached. Section 12A of the Security of Payment Act lets regulations require a head contractor to hold a subcontractor’s retention money in trust; the regulations were not read, so a solicitor checks them before settling this clause. Rule 9 confidentiality guide.
Frontier Models (ChatGPT, Claude) The retention terms transmitted Ermos Edge The AI can misstate the retention rules; a solicitor must check the regulations Ermos Dominion Stays on the unit, but the AI can misstate the retention rules; a solicitor must check Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 4The variations clause
Standard wording that variations need a written direction. It names no party or figure, though the same clause drives the dispute described in the firm’s note.
Frontier Models (ChatGPT, Claude) Standard variation wording; it names no one Ermos Edge Standard text either way; a person must check it suits the job Ermos Dominion Standard text either way; a person must check it suits the job Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 5Payment terms and the Security of Payment Act
The claim date, the payment period and the statement that payment does not wait on the principal. Section 11(1B) of the Act, as read in a January 2026 version, makes a progress payment to a subcontractor due 20 business days after the claim unless the contract sets an earlier date, section 12 gives a pay when paid provision no effect, and section 34 voids a term that excludes or restricts the Act. Rule 9 confidentiality guide.
Frontier Models (ChatGPT, Claude) The payment terms transmitted Ermos Edge The AI can misstate the Act; a solicitor must check the sections Ermos Dominion Stays on the unit, but the AI can misstate the Act; a solicitor must check the sections Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 6Insurance
Required covers and the figure. A common term that records the client’s own risk settings.
Frontier Models (ChatGPT, Claude) A standard insurance clause; low sensitivity alone Ermos Edge Stays on your instance in Australia; leaves only inside a permitted excerpt, per question, to the named provider Ermos Dominion Stays on the unit in your office Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 7Work health and safety duties
Statements of duty. SafeWork NSW’s codes say more than one person can have the same duty and each keeps responsibility to the extent it can influence and control the matter (section 16), and a person with a duty must consult, cooperate and coordinate with other duty holders on the same matter, so far as reasonably practicable (section 46). The clause names no one.
Frontier Models (ChatGPT, Claude) Repeats duties in the Act; no party or fact in it Ermos Edge Wording either way; a person must check the references Ermos Dominion Wording either way; a person must check the references Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 8Termination for breach
The notice period and what the contractor can recover. Negotiated terms, and the right the client would rely on in a dispute. Rule 9 confidentiality guide.
Frontier Models (ChatGPT, Claude) The termination terms transmitted Ermos Edge Stays on your instance in Australia; leaves only inside a permitted excerpt, per question, to the named provider Ermos Dominion Stays on the unit in your office Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 9The firm’s note: ceiling, budget and a disputed claim
What the client will pay, the principal’s budget and a past claim the client disputes, with an instruction not to mention them. Privileged instructions and the negotiating position the subcontractor would most like to see. Legal privilege guide.
Frontier Models (ChatGPT, Claude) The ceiling, the budget and a disputed claim now on a third party’s servers; on consumer tiers it can train future models Ermos Edge Stays on your instance in Australia; leaves only inside a permitted excerpt, per question, to the named provider Ermos Dominion Stays on the unit in your office Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case - 10The signatories and the solicitors
Named directors, and initials that tie the draft to practitioners bound by rule 9. Supervising AI guide.
Frontier Models (ChatGPT, Claude) Transmitted, and the leak is traceable to you Ermos Edge Signing is a person’s act Ermos Dominion Signing is a person’s act Use case Trades subcontract drafter. Drafts the trades subcontract from the head contractor's standard form and the tender details, and lists each negotiated change from the standard wording for the solicitor. See the use case
What happens in Frontier Models (ChatGPT, Claude)
- The whole document is transmitted to the provider’s servers. On personal plans the user cannot choose where it is stored or processed, and for the major providers that has generally meant outside Australia, under that country’s legal process. Some business plans offer storage in Australia, but the provider still receives the content.
- On consumer tiers, prompts can be retained and used to train future models.
- The provider’s staff and systems can reach the content under the provider’s own policies.
- Once sent, the firm no longer controls it. Retention and deletion happen on the provider’s terms.
The same document on Ermos
Ermos Dominion
The document is drafted on a unit in your office, from your own templates and the matter file. Every marked item stays on the unit, which keeps working with the internet switched off. Nothing in it is transmitted to an AI provider, so there is no disclosure to analyse: the confidentiality work is the same as for your file server.
Ermos Edge
Your documents, the index and your access boundaries stay on your own instance in an Australian data centre. When a staff member asks for this draft, only their question and the excerpts they are permitted to see go to a named Australian provider, who is contractually barred from keeping the content or training any model on it. Nothing is processed outside Australia.
| Frontier Models (ChatGPT, Claude) | Ermos Edge | Ermos Dominion | |
|---|---|---|---|
| Where the document is processed | Provider servers, generally offshore on personal plans | Your instance in an Australian data centre; answers generated in Australia | The unit in your office |
| Who can read it | Provider staff and systems, under policy | Your staff, within the boundaries you set. The named Australian provider processes only permitted excerpts, under contract, and keeps nothing | Your staff only |
| Is it kept | On the provider’s terms | Kept on your instance; the provider is barred from retaining it | Stays on the unit |
| Can it train a model | On consumer tiers, yes | No, by contract | Only your own unit learns from it, on your hardware |
Part of Use cases in law firms. See how this works in practice: Contract drafting on Ermos.
Common questions
Do ChatGPT and Claude use the information in a trades subcontract agreement?
Is it safe to paste a trades subcontract agreement into ChatGPT or Claude?
Can ChatGPT or Claude be trusted to draft a trades subcontract agreement?
How can a law firm use AI for a trades subcontract agreement without sending it to ChatGPT or Claude?
Can a head contractor make a subcontractor wait until the owner pays?
Who has work health and safety duties on a construction site?
Can a subcontract exclude the Security of Payment Act?
See Dominion answering from your own documents.
A demonstration takes 30 minutes, uses no client data, and comes with no obligation.
Book a demo