Dental Laboratory Work Orders: Use case and AI Confidentiality

Every crown, bridge, denture and night guard leaves the practice with a dental laboratory work order: the dentist’s written instructions to the technician who will make it. Dental assistants paste work orders into ChatGPT or Claude to tidy the dentist’s shorthand, to check that nothing is missing or to write the same instructions for a second laboratory. The form looks technical, but it names the patient, often carries medical alerts copied across by the practice software, attaches photographs and scans, and sometimes includes a frank note about the patient. This page marks each item in a routine laboratory work order against the Privacy Act and the Dental Board’s Code of conduct, and shows which parts the laboratory never needed.

The dental laboratory work order

Sent with the scan or impression on the day a tooth is prepared. Sending a case to a laboratory is ordinarily part of providing the treatment. Section 5.4 of the Code of conduct asks practitioners who delegate to take reasonable steps to ensure the person has the skills for the task, to stay responsible for the overall management of the patient and to communicate sufficient information.

Laboratory work order
From Tallowwood Dental, Shop 4, 17 Wombat Lane, Lane Cove NSW 2066 · Dr Anika Rao, provider number 000000AA · Thursday 5 November 2026

Laboratory
Patient
Alerts (filled in by the practice software)
Work required
Shade
Scans
Notes for the technician
Handle with care
Where it is made
Dates

Signed: Dr Anika Rao, 5 November 2026

An invented work order. The practice, dentist, patient, specialist and laboratory are fictional; the phone number, provider number, record number and account number are placeholders. Hover or tap any highlighted item for the analysis; the full list is below.

Laboratory work order preparer

An Agent+ that drafts a work order from the dentist's prescription and the patient's chart. It fills in the tooth, material, shade and return date using the practice's own order form, and leaves out medical and personal details the laboratory does not need.

What it does

  1. Reads the prescription and the treatment record
  2. Fills the practice's laboratory order form
  3. Flags missing shade, tooth or margin details

What stays with your people. The dentist checks the order against her prescription and the assistant packs and sends the case.

An Agent+ is built once and anyone in the practice can run it. It works from your own documents and runs on Ermos Dominion, the AI unit in your office, or on Ermos Edge, your own instance in an Australian data centre.

What leaves the practice

  1. 1
    The patient

    A name, sex and date of birth with the practice’s record number. On a dental laboratory form that is health information under the Privacy Act, because it was collected in providing a health service. A technician can usually make a crown from a record number, an age and a sex, so the name and full date of birth are more than the job needs. Patient data guide.

  2. 2
    Medical alerts the laboratory did not need

    Diabetes, osteoporosis and a medicine, copied onto the form by the practice software. Sensitive information that has no bearing on milling a crown. Section 3.3 of the Code of conduct asks practitioners to seek informed consent before disclosing information, and a patient who expects her dentist to send a scan to a laboratory is unlikely to expect her medication list to go with it. Patient data guide.

  3. 3
    The work required

    The tooth, the material, the margin and its history, including the specialist who retreated it. Clinical detail about a named patient, and the instruction the technician relies on. Section 5.4 of the Code asks practitioners to communicate sufficient information when they delegate. Patient data guide.

  4. 4
    Shade and photographs

    The shade and two photographs that show the lower half of her face. Section 3.3 of the Code asks practitioners not to transmit, share, reproduce or post any person’s information or images, even if the person is not directly named, without first getting written and informed consent. Privacy Act guide.

  5. 5
    The scan files

    Three-dimensional scans of her teeth with her initials in the file names, sitting on a laboratory’s portal. Health information held by a third party for the practice. Australian Privacy Principle 11.2 asks an entity to take reasonable steps to destroy or de-identify personal information it no longer needs, subject to any law that requires it to be kept. Patient data guide.

  6. 6
    Notes for the technician

    Grinding, wear and what treatment comes next. Health information the technician does need, because it changes the shape of the crown. Patient data guide.

  7. 7
    The note about a complaint and money

    A remark that the patient complained about fees and is paying in instalments, with an instruction not to contact her. Personal information about her dealings with the practice, passed to an outside business that has no use for it. Australian Privacy Principle 6.1 limits disclosure for a purpose other than the one the information was collected for unless she consented or an exception applies. Privacy Act guide.

  8. 8
    Where the crown is made

    An instruction to keep the case in Australia. Australian Privacy Principle 8.1 says that before an entity discloses personal information to an overseas recipient it must take reasonable steps to ensure the recipient does not breach the Principles. That duty falls on whichever entity sends the information offshore. Once a case is with a local laboratory, an instruction like this one is how the practice keeps a say in where it goes next. Privacy Act guide.

  9. 9
    The laboratory, the account and the price

    Which laboratory the practice uses, its account number and what it pays for a crown. Commercial information about two businesses, and beside the fee the patient was quoted, the practice’s margin.

  10. 10
    Dates and standing instructions

    When the work is due, when the patient will be in the chair, and the practice’s standing rules for labelling and returns. The fit appointment is hers; the standing rules are generic.

What happens in Frontier Models (ChatGPT, Claude)

  • The whole document is transmitted to the provider’s servers. On personal plans the user cannot choose where it is stored or processed, and for the major providers that has generally meant outside Australia, under that country’s legal process. Some business plans offer storage in Australia, but the provider still receives the content.
  • On consumer tiers, prompts can be retained and used to train future models.
  • The provider’s staff and systems can reach the content under the provider’s own policies.
  • Once sent, the practice no longer controls it. Retention and deletion happen on the provider’s terms.

The same document on Ermos

Ermos Dominion

The document is drafted on a unit in your office, from your own templates and the patient record. Every marked item stays on the unit, which keeps working with the internet switched off. Nothing in it is transmitted to an AI provider, so there is no disclosure to analyse: the confidentiality work is the same as for your file server.

Ermos Edge

Your documents, the index and your access boundaries stay on your own instance in an Australian data centre. When a staff member asks for this draft, only their question and the excerpts they are permitted to see go to a named Australian provider, who is contractually barred from keeping the content or training any model on it. Nothing is processed outside Australia.

Frontier Models (ChatGPT, Claude)Ermos EdgeErmos Dominion
Where the document is processedProvider servers, generally offshore on personal plansYour instance in an Australian data centre; answers generated in AustraliaThe unit in your office
Who can read itProvider staff and systems, under policyYour staff, within the boundaries you set. The named Australian provider processes only permitted excerpts, under contract, and keeps nothingYour staff only
Is it keptOn the provider’s termsKept on your instance; the provider is barred from retaining itStays on the unit
Can it train a modelOn consumer tiers, yesNo, by contractOnly your own unit learns from it, on your hardware

Part of Use cases in dental practices. See how this works in practice: Treatment plans on Ermos.

Common questions

Do ChatGPT and Claude use the information in a dental laboratory work order?
Everything pasted from a work order, and any photo or scan uploaded with it, is sent to the AI company's servers and processed there to produce a reply. As at October 2026, whether a conversation on a personal plan (ChatGPT Free, Plus or Pro; Claude Free, Pro or Max) can be used to train the models depends on a setting each user controls. Business plans (ChatGPT Business and Enterprise, Claude Team and Enterprise) and the developer APIs sit under commercial terms, and OpenAI and Anthropic each say they do not train on that content by default (OpenAI, Anthropic). On either product, the thumbs up and thumbs down buttons can send a whole conversation back for training. This order carries Gwen Abernethy's name and date of birth, diabetes and osteoporosis alerts the laboratory never needed, and a note that she complained about fees.
Is it safe to paste a dental laboratory work order into ChatGPT or Claude if we remove the patient's name?
No, because the order identifies her without it. Removing names rarely makes a document anonymous. Information stays personal information while the person is reasonably identifiable, and the OAIC warns that information can be at risk of re-identification even when it has been de-identified or anonymised. A date of birth, a practice record number, scans named with her initials and two shade photos showing her lower face each lead back to one woman. Her diabetes, osteoporosis and alendronate are health information, which the Privacy Act lists as sensitive information. The Office of the Australian Information Commissioner (OAIC) recommends in its guidance on commercially available AI products that organisations do not enter personal information, and particularly sensitive information, into publicly available generative AI tools, because of the significant and complex privacy risks.
Does a ChatGPT Business or Claude Team plan make it safe for a dental laboratory work order?
Not on its own. A business plan changes the default on training, but it does not change who receives the content. On a personal plan the user cannot choose where conversations are stored or processed. Some business plans let an organisation choose to store data at rest in Australia (OpenAI), which still leaves the content with the AI company. The OAIC's guidance also tells organisations to review carefully the terms and settings that will apply to their use of any AI product. This order tells the laboratory not to send the case to an outside or overseas milling centre without asking Dr Rao first. The practice should be able to answer the same question about its AI tool before the medical alerts, the shade photos and the note about her complaint are pasted in. Our comparisons with ChatGPT Enterprise and Claude weigh the trade-offs.
How can a dental practice use AI for a laboratory work order without sending it to ChatGPT or Claude?
Ermos is built so the document stays under your control. On the Dominion AI unit it is drafted inside your office and none of it is sent to an AI provider. On Ermos Edge your documents and index stay on your own instance in an Australian data centre, and only the question and the excerpts the user is permitted to see go to a named Australian provider that is contractually barred from keeping them or training any model on them. The order is drafted from the patient record and the practice's own laboratory prescription. Dr Rao checks the tooth, margin, shade and dates, removes the medical alerts and the note about her complaint, which the laboratory does not need, and signs it.
Does a dental laboratory need the patient's name?
Often it needs less than it is given. A technician can usually work from a case or record number, the patient's age and sex, the tooth, the material, the shade and the scans. Australian Privacy Principle 6.1 limits use or disclosure of personal information for a purpose other than the one it was collected for, and section 3.3 of the Dental Board's Code of conduct asks practitioners to seek informed consent before disclosing information.
What if a dental laboratory sends work overseas?
Then the patient's information may go with it. Australian Privacy Principle 8.1 says that before an entity discloses personal information to a recipient outside Australia it must take such steps as are reasonable in the circumstances to ensure the recipient does not breach the Australian Privacy Principles. That duty falls on whichever entity sends the information offshore. A practice that uses a local laboratory has no say in where a case goes next unless it asks where design, milling and file storage happen and sets terms about it.
Who is responsible for a crown made by an outside laboratory?
The dentist stays responsible for the patient's care. Section 5.4 of the Code of conduct asks practitioners who delegate to take reasonable steps to ensure the person has the qualifications, experience, knowledge or skills for the task, and says that the practitioner remains responsible for the overall management of the patient and for the decision to delegate. It also asks for sufficient information to be communicated.

See Dominion answering from your own documents.

A demonstration takes 30 minutes, uses no client data, and comes with no obligation.

Book a demo